Speed up your mold-making process with easy-to-use, two-part 3D printed dice mold forms! The two halves are easily assembled and remove smoothly from the finished mold with minimal cleanup.
Features:
Wide flange at the base to provide a better seal and minimize silicone leakage
Built-in wedge-shaped keys; when casting dice, wedge-shaped keys slide neatly into place even if the lid is put on slightly askew, reducing the risk of raised faces from keys not seating properly
Long, thin rectangular shape designed to allow excess resin to overflow out the sides (i.e. to reduce excess resin pooling in the center of the mold and causing raised faces)
You will need:
Silicone (obviously) - I use Smooth-On DragonSkin 20
A mold release for the interface between the base mold and the cap, such as talcum powder, vaseline, or mold release spray
High-tack transfer tape (I use Cricut "strong grip" transfer tape) to hold the dice masters in place and seal the bottom of the mold form
A pair of large binder clips to pinch the sides closed
Buy 7 or more mold forms and get a 10% discount! Mix and match all sizes/shapes. Discount automatically applied at checkout.
Custom sizes available on request! Send me an email at witchhazeldice@gmail.com for a quote.
This listing is for the mold form only and does not come with a silicone mold.
